Positive Input Ventilation System

How_it_works-343x257Our range of positive input ventilation systems are an energy efficient method of displacing stale contaminated air and replacing it with fresh filtered air. Fresh air is drawn from outside via the loft space through a filter on the unit and delivered into a central location in your home.

This displaces vapour-laden air, which lowers humidity levels, assisting in curing condensation and resultant mould growth developments.Unit_in_situ-343x257

  • Whole House Ventilation
  • Streaming Windows – Stopped
  • Enhanced Heat Distribution

The Wykamol Homevent unit runs continuously except when the loft temperature rises above 250C when the unit will switch off, as this hot incoming air would be uncomfortable. When the air temperature falls below 250C, the unit will switch back on.

 

To Help Keep Your Home Condensation Free:

  • Do Not Dry Clothes Over Radiators
  • Vent Tumble Dryers Externally
  • Try Not To Use Paraffin/calour Gas Type Heating

Ventilation_unit-343x257To improve the comfort of the incoming air there is an integral “intelligent low temperature” comfort heater in the unit.

This feature employs a sensor, which monitors the incoming air temperature and ensures that when the external temperature drops, the incoming air temperature does not fall below 100C.

 
Ducting-343x257Controlled by an enable/disable switch located in a convenient position within your property, this energy efficient heater uses around 7 pence per day. However, this figure can be further reduced with prudent use, by disabling when the house is empty or at other non critical times.

For further information on our Homevent Loft Unit please click here or ring the office on 0161 425 7595.